Which bit of the EMPLOYMENT EQUALITY (AGE) REGULATIONS 2006 does Kirsty Rogers, a lawyer quoted here in Personnel Today, not understand?
Ever since Age Discrimination regs came into force, busy-body human resources experts have been bandying around misleading claims that words like "experienced", "dynamic", or "energetic" in job adverts are illegal. I am not a lawyer, but to me the law seems pretty clear, and this is what is says:
Direct discrimination occurs where, because of B’s age, A treats B less favourably than he treats or would treat other persons unless A can objectively justify that treatment.
Indirect discrimination is taken to occur where –
• A applies to B a provision, criterion or practice which A applies equally to other persons; and
• that provision, criterion or practice puts persons of B’s age group at a particular disadvantage; and
• B suffers that disadvantage.
If B can show that he suffers in this way, then the provision, criterion or
practice is indirectly discriminatory unless A can show that it is a
proportionate means of achieving a legitimate aim.
(This, and excellent explanatory notes are freely available from the DTIs / BERR's website)
Note the last bit: "unless A can show that it is a proportionate means of achieving a legitimate aim."
Sure, specifying a certain level of experience would likely put a 16yr old at a disadvantage to a 30 yr old (i.e would be indirect discrimination according to the definition above), but if experience is important to the employer (and why would it be specified if it was not important?), then I'd be amazed if any court or tribunal denied that this was a "proportionate means of achieving a legitimate aim".
This is how urban myths about red tape arise - it is not from government, or Europe, or the courts. But from press releases sent out to garner publicty for the sender's organisation, whether they are a law firm, business organisation, or some other special interest group. Would Personnel Today have reproduced DWF's release if it had just said "age discrimination regulations just a matter of common sense, really". No. But they happily reproduce the sensationalist statistics, even headlining it "One in five job advertisements still fails to comply with age discrimination legislation". In the opinion of this law firm, they don't comply with the law. But has any tribunal or court found against an employer for legitimately asking for experience? Or liveliness? Or dynamism? Of course not. And if they do, I'll eat my hat.
*********
Need any odd-jobs doing? Visit www.0800handyman.co.uk
Tuesday, 9 October 2007
Friday, 5 October 2007
What's happening at DeWalt? Problems with DC935KSF XRP 14.4V cordless drill
We have had some real problems with DeWalt drills lately. We have for a long time preferred the DeWalt DC984K2 XRP 14.4V, but this has recently been superceded by the DC935KSF. We must have owned well over 20 of the old DC984K2s, and we can only recall two ever developing a fault.
These are serious bits of kit, costing £250 a pop from Screwfix, and get heavy use from our handymen, so we are pretty fussy about them working properly.
But of the four new DC935KSF models that we have bought, two have developed faults that have required them to be sent back: in one the chuck would not lock closed and kept releasing the bit; with another the chuck just wasn't centered properly, so the bit would wander around.
Plus, the slowest speed you can run the drill at is too fast to be able to grip the chuck with your hand to make it lock onto the bit (any regular user of drills will know what I am talking about: rather than screw the chuck in by hand to grip the bit, you just hold the chuck still and gently use the drill's power to close the jaws onto the bit). If you try and hold the chuck it just whizzes out of your grip. You have to turn the chuck manually, which makes changing bits a chore.
And none of our handymen like them - the older model just feels to be better quality (although DeWalt insist the replacement is a huge improvement, saying that the chuck, motor and battery are all of higher quality than the old one).
We won't be buying any more of this model of DeWalt. Screwfix have kindly agreed to swap our dodgy DeWalts for the Makita Lithium-Ion BHP440SFE 14.4V even though the Makita costs a bit more, which is very nice of them. This Makita might be a little lightweight for our use, if so then we will probably upgrade to the Makita BHP441SFE Lithium-Ion 14.4V
****
Need any odd-jobs doing? Visit www.0800handyman.co.uk
These are serious bits of kit, costing £250 a pop from Screwfix, and get heavy use from our handymen, so we are pretty fussy about them working properly.
But of the four new DC935KSF models that we have bought, two have developed faults that have required them to be sent back: in one the chuck would not lock closed and kept releasing the bit; with another the chuck just wasn't centered properly, so the bit would wander around.
Plus, the slowest speed you can run the drill at is too fast to be able to grip the chuck with your hand to make it lock onto the bit (any regular user of drills will know what I am talking about: rather than screw the chuck in by hand to grip the bit, you just hold the chuck still and gently use the drill's power to close the jaws onto the bit). If you try and hold the chuck it just whizzes out of your grip. You have to turn the chuck manually, which makes changing bits a chore.
And none of our handymen like them - the older model just feels to be better quality (although DeWalt insist the replacement is a huge improvement, saying that the chuck, motor and battery are all of higher quality than the old one).
We won't be buying any more of this model of DeWalt. Screwfix have kindly agreed to swap our dodgy DeWalts for the Makita Lithium-Ion BHP440SFE 14.4V even though the Makita costs a bit more, which is very nice of them. This Makita might be a little lightweight for our use, if so then we will probably upgrade to the Makita BHP441SFE Lithium-Ion 14.4V
****
Need any odd-jobs doing? Visit www.0800handyman.co.uk
Wednesday, 3 October 2007
Changing a light fitting / wiring a light
Changing a light fitting is the sort of job that a novice DIYer would expect to be very easy, but it actually often isn't. The novice DIYer might expect to see three wires - live, neutral and earth. But most of the time they will see a whole lot more wires than that.
With most light fittings, the ceiling rose doubles as a junction box, so you have one cable coming into the rose from the previous light in the circuit; then a cable going down to the switch and back; and then a third cable running off to the next light fitting.
We always ask handyman candidates to describe the wiring they would expect to see inside a ceiling rose - if they answer correctly straightaway, that gives us a pretty good idea that they understand how lighting circuits, and domestic electrical circuits in general are set up.
There is a good picture here of how a typical light fitting is wired.
***
Need any odd jobs doing? Visit www.0800handyman.co.uk.
With most light fittings, the ceiling rose doubles as a junction box, so you have one cable coming into the rose from the previous light in the circuit; then a cable going down to the switch and back; and then a third cable running off to the next light fitting.
We always ask handyman candidates to describe the wiring they would expect to see inside a ceiling rose - if they answer correctly straightaway, that gives us a pretty good idea that they understand how lighting circuits, and domestic electrical circuits in general are set up.
There is a good picture here of how a typical light fitting is wired.
***
Need any odd jobs doing? Visit www.0800handyman.co.uk.
Tuesday, 18 September 2007
Renewing old grouting in tiled bathrooms / showers
We are often asked to "regrout" a shower cubicle or around a bath, because the grout has got old and nasty-looking. Customers often confuse grout with silicone sealant. Replacing the silicone sealant (rubbery substance around the edge of the shower tray or bath) is straightforward (especially now all our handymen are familiar with Stan's perfected technique). Replacing grout (the rock-hard substance filling the gaps between the tiles) is not straightforward at all. In fact, you may as well not even attempt it - the grout is usually harder than the tiles, so any attempt to scrape out the old grout will inevitably result in a lot of damage to the tiles.
You'd usually be better off getting a tiler to re-tile from scratch.
Sometimes, if there is just a small area of grout that has deteriorated, you can scrape out the loose bits and apply fresh grout. But even this isn't ideal, because the new grout will look much, well, newer than the old grout in the rest of the tiles.
However, we now have a new solution: steam-cleaning the entire area, which we have found is astonishingly effective. It is time-consuming (takes about a day to do properly), but makes the tiles and grout as good as new. Plus, if there are any areas where the grout has deteriorated and crumbled, it can be replaced without the new grout looking out of place.
Even a full day's labour (plus a small charge for hire of the steam cleaner) is a lot less than having the whole area re-tiled.
The first customer we did this for was so impressed, they asked us to come back once a month (!) to keep their bathroom in pristine appearance.
If you'd also like tired tiles to look as good as new, give us a call on 0800 426 396, or e-mail fixit@0800handyman.co.uk
You'd usually be better off getting a tiler to re-tile from scratch.
Sometimes, if there is just a small area of grout that has deteriorated, you can scrape out the loose bits and apply fresh grout. But even this isn't ideal, because the new grout will look much, well, newer than the old grout in the rest of the tiles.
However, we now have a new solution: steam-cleaning the entire area, which we have found is astonishingly effective. It is time-consuming (takes about a day to do properly), but makes the tiles and grout as good as new. Plus, if there are any areas where the grout has deteriorated and crumbled, it can be replaced without the new grout looking out of place.
Even a full day's labour (plus a small charge for hire of the steam cleaner) is a lot less than having the whole area re-tiled.
The first customer we did this for was so impressed, they asked us to come back once a month (!) to keep their bathroom in pristine appearance.
If you'd also like tired tiles to look as good as new, give us a call on 0800 426 396, or e-mail fixit@0800handyman.co.uk
Thursday, 13 September 2007
Daily Mail, and others, don't understand free markets?
Daily Mail headline today expresses astonishment that the Bank of England says that "We Can't Control Mortgage Rates!".
Which bit of a free market economy does the Mail not understand? Do they really think that the huge range of mortgage deals, carefully tabulated on their own finance pages, are all individually controlled by the Bank of England? That the Bank of England says to, say, Bristol and West that their 5yr, 0.5% discount tracker deal, with £2k cashback and a £100 M&S voucher is fine; but that they'd prefer that the Woolwich shaved a couple of basis points off their 1yr-fixed, first-time-buyer- only offer?
The article at one point reminds us of the problem of sub-prime defaults in the US and says that "as a result, High Street lenders here are lookng to make more money from borrowers".
So, if it wasn't for the situation in the US, UK banks would be happy making less money from borrowers? That's just silly. Any bank will always try to make as much money as possible from their customers, but they are restrained by the fact that they operate in a competitive market. This is obvious stuff, everyone knows this really, don't they? They know that prices are controlled not by the State, but by competition from other companies?
But, you know, I think that while everyone sort of knows this, lots of people don't really believe it. They think that companies are generally out to get them, and if something is expensive that is nothing to do with the price the market will stand, but because the company is ripping them off.
I had a conversation with my brother (a scientist) recently about his car insurance, and he was utterly convinced that all insurance companies operate in a cartel, and that there is no competition for his business. He really believed this to be the case. Maybe it is, but it seems it would be a very, very complex cartel to manage. It seems to me much more likely that the market for car insurance in the UK is highly competitive, and if you are unmarried, drive a Lotus which you sometimes take to track days, and park it on the street in Bloomsbury, your premium is probably going to be quite high however competitive the market is.
Which bit of a free market economy does the Mail not understand? Do they really think that the huge range of mortgage deals, carefully tabulated on their own finance pages, are all individually controlled by the Bank of England? That the Bank of England says to, say, Bristol and West that their 5yr, 0.5% discount tracker deal, with £2k cashback and a £100 M&S voucher is fine; but that they'd prefer that the Woolwich shaved a couple of basis points off their 1yr-fixed, first-time-buyer- only offer?
The article at one point reminds us of the problem of sub-prime defaults in the US and says that "as a result, High Street lenders here are lookng to make more money from borrowers".
So, if it wasn't for the situation in the US, UK banks would be happy making less money from borrowers? That's just silly. Any bank will always try to make as much money as possible from their customers, but they are restrained by the fact that they operate in a competitive market. This is obvious stuff, everyone knows this really, don't they? They know that prices are controlled not by the State, but by competition from other companies?
But, you know, I think that while everyone sort of knows this, lots of people don't really believe it. They think that companies are generally out to get them, and if something is expensive that is nothing to do with the price the market will stand, but because the company is ripping them off.
I had a conversation with my brother (a scientist) recently about his car insurance, and he was utterly convinced that all insurance companies operate in a cartel, and that there is no competition for his business. He really believed this to be the case. Maybe it is, but it seems it would be a very, very complex cartel to manage. It seems to me much more likely that the market for car insurance in the UK is highly competitive, and if you are unmarried, drive a Lotus which you sometimes take to track days, and park it on the street in Bloomsbury, your premium is probably going to be quite high however competitive the market is.
Wednesday, 12 September 2007
Why are insurance claims handlers so bad at handling claims?
For the first time (as far as I can recall) in our 6yr history we have recently had cause to claim on our public liability insurance. We fitted a ball valve to a storage tank, the valve subsequently failed, the overflow couldn't cope and water flooded into the customer's property, damaging paintwork and carpets.
No huge drama, but large enough cost (well into four figures) to warrant claiming on the insurance. How long would you think it might take, from notifying the insurance company to them authorising the repairs (bearing in mind this is water damage, so pretty unpleasant to live with for any length of time)? A week? Two weeks?
Six weeks on, and we still haven't had any decision from the insurers (AXA, who have subcontracted the claims handling to Cunningham Lindsey). In the meantime, we've just gone ahead and repaired everything that we can do ourselves, but customer is still left with old carpets. We don't want to tell him to just get new carpets and send us the bill, because the insurers might want to inspect the old carpets.
Why does it take so long? Why can't it work like this:
Day 1: Notify insurance company of potential claim
Day 1: Insurance company contacts customer and arranges to inspect damage (in, say, 5 days time)
Day 2: Customer gets estimates to repair damage
Day 6: Insurance co inspects damage, reviews estimates
Day 7: Insurance co authorises repairs
Why does it take weeks and weeks? And why do we have to manage the process (i.e. we only see any progress at all if we badger the insurance company)?
Although this is the first time we've had to claim on our own insurance, we've often had to claim on other peoples for road traffic prangs, and the process is always extremely painful even when there is no dispute about liablity.
No huge drama, but large enough cost (well into four figures) to warrant claiming on the insurance. How long would you think it might take, from notifying the insurance company to them authorising the repairs (bearing in mind this is water damage, so pretty unpleasant to live with for any length of time)? A week? Two weeks?
Six weeks on, and we still haven't had any decision from the insurers (AXA, who have subcontracted the claims handling to Cunningham Lindsey). In the meantime, we've just gone ahead and repaired everything that we can do ourselves, but customer is still left with old carpets. We don't want to tell him to just get new carpets and send us the bill, because the insurers might want to inspect the old carpets.
Why does it take so long? Why can't it work like this:
Day 1: Notify insurance company of potential claim
Day 1: Insurance company contacts customer and arranges to inspect damage (in, say, 5 days time)
Day 2: Customer gets estimates to repair damage
Day 6: Insurance co inspects damage, reviews estimates
Day 7: Insurance co authorises repairs
Why does it take weeks and weeks? And why do we have to manage the process (i.e. we only see any progress at all if we badger the insurance company)?
Although this is the first time we've had to claim on our own insurance, we've often had to claim on other peoples for road traffic prangs, and the process is always extremely painful even when there is no dispute about liablity.
Tuesday, 11 September 2007
Top tip when applying for a job ...
... read the job advert properly.
We are currently looking for more London handymen, and have an ad running in Gumtree (here). The ad specifically asks people to go to our website and complete the application form they will find there. It specifically says not to simply use the form on Gumtree to send in a CV.
At least 50% of the respondants simply send in their CV, it is just unbelievable. I suppose they are just not even reading the ad, it is a bit annoying.
We are currently looking for more London handymen, and have an ad running in Gumtree (here). The ad specifically asks people to go to our website and complete the application form they will find there. It specifically says not to simply use the form on Gumtree to send in a CV.
At least 50% of the respondants simply send in their CV, it is just unbelievable. I suppose they are just not even reading the ad, it is a bit annoying.
Subscribe to:
Posts (Atom)
